|
More 2-FL Fixture Lock Application Photos
(2-1)
Four 2-FLs with fixturing. The knobs on the end of the center bars have
been replaced by discs. A tool is used to pry back the center bar and
v-blocks to load the part. The springs hold the part in place before
the locking lever is closed. The dowels on either side of the v-block
keep the v-block aligned properly.
(2-2) Same unit as above.
(2-3) Same unit as above.
Go
To Page
1 2
3 4
5 6
7 8
9 10
11
12 13
14
Back to Photo
Index
|
